Kits and accessories
Chiller 5-40 °C, thermostatic bath from -10 to +50 °C, density kit, anti-vibration table, USB and RS232 printers.
Density kit
Kit for determining the density of solids and liquids by the gravimetric method, for Gibertini laboratory balances with below-balance weighing: semi-micro, analytical, CENT-2.
The sample is weighed in air, then immersed in water without touching the bottom of the cylinder; the balance calculates and displays the density from the two values.
ISO 1183-1 method: readability of 0.1 mg or finer, sample of at least 1 g (CRYSTAL and ETERNITY series). Other references: OIML G 14, ASTM D 792.
The kit includes
- Balance support frame
- Hook for hydrostatic weighing
- Sample holder
- Container for distilled water, 200 × 200 mm
- Manual lift
- Optional: stainless steel anti-floating pin, to hold samples lighter than water
Anti-vibration table
Anti-vibration station for precision balances: marble top on a painted iron frame.
- Load-bearing frame in heavy-gauge painted iron sections
- Marble work surface 520 × 620 mm, or 650 × 1100 mm for two balances
- Total weight: approx. 70 kg
Label and data printing
Two direct thermal printers, with USB or RS232 connection.
Brother QL-800
Label printer
- Direct thermal, 2-color printing
- USB 2.0 connection (full speed)
- Power supply 220-240 V AC
- Dimensions 12.5 × 14.2 × 21.3 cm
DP24T-SER
24-column printer
- Direct thermal, 24 columns
- RS232 connection
- Power supply 220-240 V AC
Safety data sheets and information sheets for solutions, reagents and additives are collected on the Safety data sheets page.
Temperature control and cooling
Thermochiller
Recirculating liquid chiller
For Gibertini SDEE and DEE electronic enological distillers.
- Adjustable temperature from 5 to 40 °C, stability ±0.1 °C
- Electronic control with digital display
- Built-in recirculation pump; 5-liter tank
- Swivel casters for positioning
- Dimensions 38 × 50 × 62 cm (W × D × H); net weight 43 kg; noise level 60 dB
- Automatic restart after a power failure; self-diagnostics on the display; low liquid level detection; filter removable without tools
Thermostatic bath
Laboratory water bath
Outer housing in heat-insulating, impact-resistant material; stainless steel tank for up to 9 bottles. Applications: biological, medical and biochemical laboratories.
- Electronic proportional-derivative temperature control from −10 to +50 °C, accuracy 0.1 °C
- Temperature setting from the display with keys
- Usable tank 30 × 35 × 19 cm
- 230 V, 1600 W; 32 × 58 × 83 cm (W × D × H); 39 kg
Find the best solution to your needs
A qualified expert will analyze your needs to choose the right instrument.
Contact an expert