E50S/3 - Semi-Micro Scale
Gibertini semi-micro scales from 0.01mg to 0.1 mg and maximum flow rate 100 g to 225
Accuracy and precision for your laboratory
The semi-micro scales of the E50S / 3 series with capacity from 100g up to 225g and division as 0.01mg to 0.1mg are designed to guarantee high performance, protected by a solid screen to reduce environmental components.
Their applications range from weighing active ingredients, pipette calibration, chemical analysis, veterinary analysis, pollution or mining to measure small amounts of powders and minerals.
Calculate Minimum Weight Eu.Ph. (2.1.7)
FEATURES
Fast and Safe Analysis
E50S / 3 series Gibertini semi-micro scales from 0.01mg to 0.1mg and maximum capacity 100g to 225g are used in numerous areas thanks to their robustness and repeatability and fast stabilization times over the entire weighing range . For example :
FUNCTIONALITY
Accurate & Versatile
The need for precision and high accuracy in the readings requires constant calibration of the instrument. Thanks to the self-calibration or internal calibration, process times are considerably reduced.
QUALITY SERVICE
Accredited calibration service
The requests for calibration service from accurate, efficient and compliant laboratories are constantly increasing in all sectors. Gibertini offers certified and accredited services. We support and assist your laboratory instruments throughout their entire life cycle.
To ensure compliance with the required standards and the reliability of the measurement results ( GMP, GLP, Ph.Eur ).
Quality ServiceThe smallest possible sample weight on a laboratory balance is related to the minimum weight (R), which is 2000 times the standard deviation. Therefore, if the calculated standard deviation turns out to be s = 0.25 mg, the minimum weight will be R = 500 mg.
Below is the table of the minimum possible weights for the semi-micro E50S / 3:
| Mode | Capacity | Division | Minimum Weight |
|---|---|---|---|
| E50S/3 Semimicro | 100 g | 0.01 mg | 8.2 mg |
| Model Name | Capacity | Readability | Linearity | Repeatability | Response time | Pan dimensions | Calibration |
|---|---|---|---|---|---|---|---|
| E50S/3 | 100 g - 225 g | 0.01 - 0.1 mg | ± 0,019 - ± 0,2 mg | ± 0,007 - ± 0,04 mg | 6/8 - 3/5 sec. | Ø 80 mm | Internal |
| Serial output | RS232 configurable |
| Operating temperature | 10° ÷ 35°C |
| Power Supply | 230V (-15% / +20%) 50Hz (on demand 110 V) |
| Absorption | 12 VA |
| Total Dimensions (L x W x H) | 210 x 340 x 320 mm |
| Weighing chamber size (L x W x H) | 180 x 170 x 220 mm |
| Net weigh | 6,6 kg |
Accessories
For all Gibertini Semi-Micro E50S / 3 series scales the following accessories are available :
Industry & Applications
Food
Meat, Fish, Eggs, Milk, Cereals, Legumes, Fats and Oils
Agriculture
Seeds, Vegetables, Fruits, Raw materials (corn, wheat, coffee, soy, cocoa)
Pharma
Raw materials analysis, active ingredients, compliance with pharmacopoeia regulations
Beverage
Wine, Beer, Spirits, Juices, Soft Drinks, Energy Drinks, Sport Drinks
Environmental
Water Analysis, Filters (PM10), Soil.
University
Research laboratories. science faculties, chemistry, physics, materials sciences
Cosmetics
Raw materials analysis, Dosage/formulations, Creams, Solutions, Waxes
Gemology Mining
Gold and Precious, raw materials analysis
Analysis laboratories
Clinics (Pre-analytical, Analysis, Post-analysis), Pharmacological, Forensic
Chemical
Plastics, Detergents, Ceramics, Lubricants, Petroleum, Reagents
Forensic
analysis, weight, drugs density, narcotics, splinters
Energy
energy efficiency, special waste